Westerbeke 120D-TWO Manual do Utilizador descarregar pdf (Página 22)

Component Removal and Replacement

R000 – Focusing Lens

Table of Contents

1. Make sure the PLS is powered OFF and unplugged.

2. Open the top door and pull the X-Axis

Arm (1) forward.

3. Locate the Focus Carriage (1).

4. Remove the three thumbscrews

completely (2). Set them aside in a

safe place.

5. Grasp the Front Cover Plate (3).

Gently slide it forward and out of the

Focus Carriage to remove the optics.

6. Place the optics on a soft, non-abrasive cloth.

7. Remove the two Phillips head screws

(1) that attach the Focusing Lens to

the Front Cover Plate and remove the

optic.

8. Attach the new Focus Lens to the

Front Cover Plate.

9. Clean the #3 Mirror (2) if necessary.

10. Reinstall the optics in the Focus Carriage.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Sem comentários

Westerbeke 120D-TWO Manual do Utilizador Página 22